|
Products and Services
» UV-23-06
Universal Former
The UV-23 Series Universal
Vacuum FormingMachine provides a flexible manufacturing
solutionfor the sanitary ware industry. High qualityengineering
of mould table and clamping systemsensure swift
tool change. With PLC program controland user
friendly interfaces the machine is veryeasily
integrated into the production environment.This
machine must be used in conjunction with aseparate
sheet heating oven. Please see therelevant Armour
specification sheets for details.
The operator lays the
hot plastic sheet from the separately supplied oven
onto the clamping frame (1) and
it is prevented from sagging by the draw board (not
shown). When the Operator presses the two-hand start
buttons on the control panel (2)
the clamping frame activates and clamps the plastic
sheet. The Operator presses the buttons again and
the mould moves down to allow the draw board to
be removed through the aperture on the front of
the machine (3). On pressing the
buttons again, the mould moves up into the plastic
sheet (at this point a “bubble” can
be blown in the sheet via the mould vacuum system
if required), the vacuum is then automatically switched
on, the product moulds and then the cooling fans
(4) turn on to cool the product.
When the cooling is completed an alarm buzzer sounds
to alert the operator to release the product by
again pressing the two-hand start buttons.
Download the Specification table
below:
Download
Universal Former Specification
«
Go back to Products & Services page
« Go back to Forming Machines page
»
VT-22-06 Vertical Thermoformer
»
HT-23-06 Horizontal Thermoformer
»
HT800-06-AA Horizontal Thermoformer
|
