Products and Services

The CC range of curing tunnels can be specified for any capacity requirement. All models use a system of motorised chain conveyors to carry products through for curing, and for the return of the empty product supports. The heating system can be supplied in any format to suit the requirements of the customer. Temperature is thermostatically regulated via the PLC control system. Low-level vents are fitted suitable for connection to external ducting (not supplied) to extract styrene gas emitted during the curing process.



The product (1) is loaded onto the support system (2) and placed onto the entry roller section (3). From here it can be pushed forward until the main chain conveyor (4) picks up the edge of the support. It will then be automatically drawn through the steel enclosure (7) that forms the tunnel. The products are carried through and on exiting the tunnel fully cured, they reach the exit roller section (4) where they come to rest at a physical stop. If products are not removed by the operator then a switch automatically stops the relevant conveyor until they are removed. The empty product supports are returned for re-use by the returns conveyor (5).


Download the Specification table below:

Download Curing Tunnel Specification